Unfinished Wood Paw Print Shape - Pet Craft - up to 46

Welcome to 24 Hour Crafts! If you need a hole in this paw - print shape, just drop us a message with the size and location you want. We're here to support your project at no extra cost. This unfinished wood product is sanded natural wood with lightly burned edges from cutting. It comes in diameters ranging from 3 inches up to 36 inches. We'll ship it within 24 hours, or it's free! These crafts are cut from 1/8 (3mm), 1/4 (6mm), or 1/2 (12mm) cabinet - grade Baltic birch plywood. If you need a different thickness, message us. We hand - make all our products in the Pittsburgh suburbs. Our attention to detail shows in the high - quality finished products. If you have any questions, click 'Message Seller', and we'll assist you. Thanks for shopping with 24 Hour Craft! Most crafts have a protective paper backing that you should peel off before starting your craft. This backing protects the wood during laser cutting and shipping.

Using this unfinished wood paw - print shape for your pet craft is easy. First, peel off the protective paper backing. This was there to keep the wood safe during cutting and shipping. If you need a hole in the shape, tell us the size and where you want it, and we'll add it for free. You can choose from different diameters, from 3 inches up to 36 inches, and three different thicknesses of cabinet - grade Baltic birch plywood. Just do your crafting as you like! To keep it in good condition, avoid getting it too wet. If it gets dirty, you can gently wipe it with a dry cloth. Remember, we make these products by hand in the Pittsburgh suburbs, so you're getting a high - quality item. If you have any problems or questions, just message us, and we'll help you out.