Welcome to 24 Hour Crafts! If you need a hole in this curved diamond - shaped unfinished wood piece, just send us a message with the size and location you want. We'll do it for free to support your project. This natural - sanded wood product has lightly burned edges from the cutting process. Available in sizes from 1 inch up to 24 inches, it ships within 24 hours or it's free! These DIY crafts are cut from 1/8 (3mm), 1/4 (6mm), or 1/2 (12mm) inch cabinet - grade Baltic birch plywood. If you need a different thickness, message us. We hand - make all our products in the Pittsburgh suburbs, paying close attention to detail, which shows in the quality of the finished items. If you have any questions, click 'Message Seller', and we'll assist you. Thank you for shopping at 24 Hour Craft! Most crafts come with a protective paper backing. Peel it off before starting your craft to protect the wood during laser cutting and shipping.
Using this unfinished curved diamond - shaped wood piece for your DIY project is easy. First, peel off the protective paper backing that's on the wood. This backing is there to keep the wood safe during laser cutting and shipping. You can use it for a variety of crafts. If you need a hole in it, just tell us the size and where you want it, and we'll add it for free. When it comes to the size, it's available from 1 inch up to 24 inches, so pick the one that suits your project. The wood is made from cabinet - grade Baltic birch plywood in thicknesses of 1/8 (3mm), 1/4 (6mm), or 1/2 (12mm). If you need a different thickness, let us know. For maintenance, keep the wood in a dry place to prevent warping. And if you're going to paint or stain it, make sure the surface is clean. We made these products by hand in the Pittsburgh suburbs, so you know they're made with care. If you have any questions, don't hesitate to message us.
